.jpg)
.jpg)
The VCS13-108-LB-01-MCF voice coil positioning stage uses H2W voice coil motor NCC13-30-108-1SH to generate a continuous/peak force of 10.8 lbs [48.0 N]/32.4 lbs [144 N] with a total stroke length of 1.3 in [31.8 mm]. The 1.0-micron resolution encoder allows for precise positioning. The load cell with signal conditioner (100 N capacity, 1 N resolution) allows for 1-100 N of push/pull force feedback. It comes supplied with a rigid recirculating ball linear bearing. The motor coil is the moving part of the assembly to reduce the moving mass of the system. Power is supplied to the motor via a high flex, high reliability flat ribbon cable.
| Motor P/N |
NCC13-30-108-1SH 
|
|
| Stroke | 1.25 in | 31.8 mm |
| Encoder Resolution | 1 micron | |
| Bearing Type | Linear Bearing | |
| Moving Mass | 24 oz | 418 grams |
| Total Mass | 96 oz | 2000 grams |
| Resistance @ 20C | 4.8 ohms | |
| Inductance @ 20C | 4.1 mH | |
| Electrical Time Constant | 0.9 msec | |
| Motor Constant | 2.3 lbs/√watt | 7.6 N/√watt |
| Force Constant | 5 lbs/amp | 22.3 N/amp |
| Back EMF | 0.5 V/ips | 22.3 V/m/sec |
| Force @ 100% Duty | 10.8 lbs | 48 N |
| Power @ 100% Duty | 23 watts | |
| Current @ 100% Duty | 2.2 amps | |
| Force @ 10% Duty | 32.4 lbs | 144 N |
| Power @ 10% Duty | 200 watts | |
| Current @ 10% Duty | 6.5 amps | |
| Moving Part | Coil Assembly | |
