Linear Stages > Single Rail Stages > SRS-012-07-100-01

Single Rail Stage - SRS-012-07-100-01

Single Rail Stage,a linear motor,product,SRS-012-07-100-01
Single Rail Stage, SRS-012-07-100-01
The SRS-012-07-100-01 single rail positioning stage uses a brushless linear motor to generate a continuous/peak force of 100 lbs [444 N]/300 lbs [1332 N] with a total stroke length of 12.0 in [305 mm]. The non-contact 1.0-micron resolution encoder allows for precise positioning. It is guided by a rigid recirculating ball linear bearing. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request.

For short stroke, compact size positioning stages please see our Voice Coil Positioning Stages.

To determine your motion profile needs, use our linear motion calculator.

Motor P/N n/a
Stroke12.0 in305 mm
Encoder Resolution1.0 micron
Bearing TypeRecirculating Ball
Moving Mass13.0 lbs5.9 kg
Total Mass64.3 lbs29.1 kg
Resistance @ 20C16.0 ohms
Inductance @ 20C20.0 mH
Electrical Time Constant1.3 msec
Motor Constant6.2 lbs/√watt27.7 N/√watt
Force Constant24.5 lbs/amp109 N/amp
Back EMF3.2 V/ips126 V/m/sec
Force @ 100% Duty100 lbs444 N
Power @ 100% Duty263 watts
Current @ 100% Duty4.1 amps
Force @ 10% Duty300 lbs1332 N
Power @ 10% Duty2367 watts
Current @ 10% Duty8.7 amps
Stage Length31.8 in808 mm
Stage Width7.0 in178 mm
Stage Height3.9 in99.1 mm
Product Drawing

Request A Quote

First Name
Last Name
Company
Email
Phone
Quantity Required:
Product to Quote:
Comments & Special Instructions: