Single Rail Stage,a linear motor,product,SRS-006-04-030-A
Single Rail Stage, SRS-006-04-030-A
The SRS-006-04-030-A single rail positioning stage uses a brushless linear motor to generate a continuous/peak force of 30.1 lbs [134 N]/90.3 lbs [402 N] with a total stroke length of 6.0 in [152 mm]. The non-contact 1.0-micron resolution encoder allows for precise positioning. It is guided by a rigid recirculating ball linear bearing. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request.

For short stroke, compact size positioning stages please see our Voice Coil Positioning Stages.

To determine your motion profile needs, use our linear motion calculator.

Motor P/N n/a
Stroke6.0 in152 mm
Encoder Resolution1.0 micron
Bearing TypeRecirculating Ball
Moving Mass3.6 lbs1.6 kg
Total Mass15.6 lbs7.2 kg
Resistance @ 20C12.1 ohms
Inductance @ 20C9.0 mH
Electrical Time Constant0.70 msec
Motor Constant2.6 lbs/√watt11.6 N/√watt
Force Constant9.2 lbs/amp11.6 N/amp
Back EMF1.2 V/ips40.9 V/m/sec
Force @ 100% Duty30.1 lbs134 N
Power @ 100% Duty135 watts
Current @ 100% Duty3.3 amps
Force @ 10% Duty90.3 lbs402 N
Power @ 10% Duty1215 watts
Current @ 10% Duty9.9 amps
Stage Length18.3 in464 mm
Stage Width5.4 in137 mm
Stage Height2.7 in68.6 mm
Product Drawing

Request A Quote

First Name
Last Name
Quantity Required:
Product to Quote:
Comments & Special Instructions: