Linear Stages > Linear Stepper Stages > LSS-031-04-011-MEA

Single Axis Linear Stepper Stage - LSS-031-04-011-MEA

Single Axis Linear Stepper Stage,a linear motor,product,LSS-031-04-011-MEA
Single Axis Linear Stepper Stage, LSS-031-04-011-MEA Thumbnail,
The LSS-031-04-011-MEA is a revolutionary new series of single axis linear stepper stages that integrates a linear encoder into the single-axis linear stepper motor stage to operate the linear stepper motor as a 2-phase brushless linear motor, when coupled with state-of-the-art motion control electronics package provided by H2W. It uses H2W linear stepper motor STS-1220-AP3 to generate a force of 11.0 lbs [48.8 N] with a total stroke length of 31.0in [788mm]. The 1.0-micron resolution encoder allows for precise positioning. The moving motor has a high flex power cable guided by a cable carrier. It has end-of-travel rubber bumper stops. There are also provisions that allow customer cables to be routed within the cable carrier. Custom mounting holes on the moving table are available upon request at no additional charge. Integral air bearings are used to maintain the required motor air gap. 60-80 PSI of filtered compressed air should be supplied by the customer.

To determine your motion profile needs, use our linear motion calculator.

Motor P/N STS-1220-AP3
Stroke31 in788 mm
Encoder SuppliedYes
Bearing TypeAir Bearing
Forcer Mass1.1 lbs500 grams
Total Mass15 lbs6800 grams
Resistance @ 20C1.15 ohms
Inductance @ 20C1.3 mH
Electrical Time Constant1.1 msec
Force11.0 lbs48.8 N
Current4 amps
Stage Length37.0 in939.8 mm
Stage Width4.73 in120.1 mm
Stage Height2.44 in61.9 mm
Product Drawing

Request A Quote

First Name
Last Name
Company
Email
Phone
Quantity Required:
Product to Quote:
Comments & Special Instructions: