Five-Meter Long Stroke Single Piece Extrusion Stage,a linear motor,product,DRS-206-05-012-01-EX
Five-Meter Long Stroke Single Piece Extrusion Stage, DRS-206-05-012-01-EX

The DRS-206-05-012-01-EX dual rail positioning stage is ideal for applications that require long travel distances. It uses a cog-free brushless linear motor to generate a continuous force of 12.4 lbs [55.6 N] and a peak force of 37.4 lbs [167 N] with a total stroke length of 210 in [5341 mm]. The non-contact 1.0-micron resolution encoder allows for precise positioning. The stage is capable of speeds in excess of 200 ips [5 m/s]. It is guided by dual rigid recirculating ball linear bearings. The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system and easily allowing for long strokes and prevents the need for reassembly at the customer facility. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops.

For smaller cross-section, lighter weight brushless linear motor driven positioning stages. Please see our SR Positioning Stages.

To determine your motion profile needs, use our 
linear motion calculator.

Motor P/N BLDM-B04
Stroke210.26 in5340.6 mm
Encoder Resolution1 micron
Bearing TypeRecirculating Ball
Moving Mass7 lbs3.17 kg
Resistance @ 20C3.2 ohms
Inductance @ 20C2 mH
Electrical Time Constant1 msec
Motor Constant1.17 lbs/√watt5.2 N/√watt
Force Constant1.5 lbs/amp6.6 N/amp
Back EMF0.17 V/ips6.6 V/m/sec
Force @ 100% Duty12.4 lbs55.6 N
Power @ 100% Duty78.6 watts
Current @ 100% Duty4.1 amps
Force @ 10% Duty37.4 lbs166.6 N
Power @ 10% Duty707.4 watts
Current @ 10% Duty12.6 amps
Stage Length224.9 in5712.7 mm
Stage Width7 in177.8 mm
Stage Height3.4 in85.7 mm
Product Drawing

Request A Quote

First Name
Last Name
Quantity Required:
Product to Quote:
Comments & Special Instructions: