| 1. |
Compact,
small footprint, open type positioning stage for carrying lighter
loads. It is driven by an ironless core, non-cogging 3 phase brushless
linear motor and guided by 2 recirculating ball bushing guides on
a single linear rail.
|
| 2. |
Low
profile, wider footprint, enclosed positioning stage for carrying
heavier loads. It is driven by an iron core 3-phase brushless linear
motor and guided by 4 recirculating ball-bushing guides on 2 parallel
linear rails. The stage is enclosed with side and end covers as
well as a set of bellows.
|
| 3. |
Compact,
small cross section open or enclosed positioning stage for short
stroke linear servo applications (up to 12 inch stroke). It is driven
by either an iron core or ironless core 3-phase brushless linear
motor and guided by 2 sets of parallel cross roller bearings. The
stage can be enclosed end covers and a set of bellows.
|
| 4. |
High
precision, granite base, air bearing positioning stage for high
end positioning applications. It is driven by an ironless core,
non-cogging 3 phase brushless linear motor and guided by the granite
base and 5 flat magnetically preloaded air bearings.
|
| 5. |
Open
or enclosed, lead screw or ball screw positioning stages for slow
speed, high force, linear servo applications It is driven by either
a rotary 3-phase brushless motor or a rotary stepper motor and are
guided by 2 sets of parallel cross roller or recirculating bearings.
Options include motor mounts, limit switches and linear encoders.
|
| 6. |
Open
or enclosed positioning stages for high speed, long stroke, linear
servo applications It is driven by either a rotary 3-phase brushless
motor or a rotary stepper motor and is guided by 1 set of recirculating
bearings. Options include motor mounts, and linear encoders.
|
| 7. |
Multi-axis
positioning stage systems can be configured in many different formats.
Any combination of H2W Technologies linear positioning stages can
be mounted together. Shown in the picture is a 4 axis, dual XZ,
Ball screw driven positioning stage, mounted on a granite base with
linear encoders on each axis for Dual Loop servo operation.
|
